Weathering a Rapido CF7, Part 1

I’ve finally gotten around to weathering the LAJ CF7 that Rapido gave me/bribed me with. A philosophy veteran modelers have passed on to me is that you don’t need huge blocks of time to get things done. Fifteen minutes here, thirty minutes there, consistently applied, adds up. In the case of weathering, I think that works to your advantage. The biggest landmine with effective weathering is applying it too thick, being too heavy-handed. The light touch? Easier said than done. You constantly need that voice in the back of your head whispering, “easy does it, easy does it, stop. Take a break.” With this project, I did one step, took a breather, evaluated it, and if it was too thick, spent the next time block dialing it back. I spread out what I did in this installment over about a week. Take your time.


I started with the low hanging fruit meaning easy stuff and worked from the bottom up.

  1. Added Kadee 158 scale couplers and trimmed the hideous trip pins off. I did lightly dry-brush on some rusty earth tones, but you need to be super careful to keep even a hint of paint out of the hinge points. It’s okay to skip painting them.
  2. The trucks need shadows; they need contrast. I masked off the trucks, sprayed on some Dullcote, and let it dry. Next, I took Bragdon “Soot Black” chalk, ground it into the side frames with a ratty brush, and applied more Dullcote. This is where taking a pause really helps. Looking at it the next day, I’d overdone the black. It was too much. I dipped a brush in lacquer thinner and washed away a lot of the chalk. When that dried, there were some odd swirl patterns, which I wiped away with a damp Q-tip. Important note: Do NOT apply Dullcote to the rest of the model at this point. Just the trucks.
  3. The fuel tanks were airbrushed with Tamiya Nato Black.
  4. Next up I added Tamiya Panel Line accent colors to give some snap to the cracks and crevices. This will be the subject of my next newsletter. It’s important that you do this step before applying Dullcote. The product needs a glossy surface for the capillary action to work. (Panel line accent application tutorials can be found on YouTube)
  5. Fading the yellow. I filled my airbrush bottle about two-thirds of the way with Tamiya X-20 thinner and then added four drops of flat white to the mix. I did three airbrush passes. First, I hit all of the yellow areas with the fade wash and let it dry. Next, I made two more light passes, making a point to steer clear of the blue lettering. You need to use fine airbrush tips to achieve that level of control. Note that in the prototype photo, the lower sills aren’t faded and are a slightly darker color. I masked off the bottom before doing the airbrush fade to the cab.
  6. Masked and painted the airhorn a medium gray.

Here’s the photo I’m working off of. In the next installment, I’ll work on the roof and rust streaks.