Tradepoint Cat & Mouse

Having just made a transfer run from Grays Yard, Tradepoint Atlantic SW7 #936 coasts across Tradepoint Avenue, where it will tie up for a lunch break.


Part of the thrill of industrial rail fanning is that it’s always a game of cat and mouse. The distances aren’t that long as the crow flies, but I’m not a crow, and I can’t fly. You see a train at location A and commit to winding down some narrow industrial alley to photograph it. You get there, and it’s departed for location B. There is never a direct route through the parks. You go to B, and it’s moved back to A. You get the idea. I’m used to it and set my expectations appropriately low.

I’ve changed my rail fan strategy to focus on the weather. This week we’ve been dealt a perfect 10 in Maryland: sapphire blue, cloudless skies, 65-degree temps, and a fall sun low on the horizon, which is ideal for vivid, high-contrast photos. I’ve gotten more familiar with the Baltimore/York switching schedules, so my odds are high of catching something. Short version: you’d better get there early in the day.

Today’s plan was to shoot Tradepoint Atlantic in Baltimore’s Sparrow’s Point neighborhood. The definition of a plan is something you optimistically hope will happen, but in rail fanning, probably won’t. You usually get something, just not what you thought.

Here’s a map of today’s adventure. To put things in perspective, it isn’t a very large area. I parked my car at Denny’s and made the 3/4 mile walk along Finishing Mill Road to the Tradepoint Office/Loco Facility/Main yard. The Tradepoint industrial park sits on the old site of Bethlehem Steel’s Sparrows Point (Baltimore) facility. Just out of view to the left would be tons of old bars and diners, right out of the series The Wire.


Tradepoint makes a lot of morning transfer runs between its main yard and Grays Yard (2 miles north), where it interchanges with CSX. Finishing Mill Road parallels the line for about half of that run. Today starts with me parking my car at Denny’s and beginning the 3/4-mile walk along Finishing Point toward Tradepoint’s main facility. Sure enough, ten minutes later a southbound transfer run shows up. I didn’t position myself that well with respect to the sun, and the four shots I got were mediocre at best. The train passes and I’ve got squat. Silence except for the sound of chirping birds. Welcome to the world of rail fanning.

I walk the rest of the way to Tradepoints office and ask if anything is coming this way. The office manager looks at her sheet. “Nope, doesn’t look like it, at least for a few hours.” Expletive deleted. Accepting defeat, I walk back towards Denny’s to pick up my car and make the 45-minute drive home. What a waste. Ten minutes into my walk back ….a horn. I’m now perfectly positioned in terms of sight lines and sun angle. A SW7 comes around the corner dragging two cars. Nailed the shots. Now I’m happy.

I continue my walk. Five minutes later, another horn. What the…? An SW1500 follows on the heels of the SW7 with a massive cut of cars bound for The Home Depot warehouse. More great shots under perfect lighting.

I know from experience that if I go back to the yard office, both switchers will be in the yard running around their trains. So I turn around and start walking back to the Tradepoint yard. Having done this before, I know where to set up for the shot I want.

I get to the crossing at Tradepoint Avenue. Just as I thought, both switchers are heading my way. I’m sort of wedged into a ten-foot-wide island between the street and tracks. The gates start coming down. Then, out of the corner of my eye, I see a semi flying towards the crossing, hoping to beat the gates. He realizes he won’t make it and flat-spots the tires as he tries to stop. He does, but the gates come down like a knife on a chopping block between the cab and trailer. I have nowhere to go. Fortunately, he still had clearance, and the switcher was only going five mph, so things played out safely. Bottom line, what started out as a dud of a day turned out pretty well. Here are some of the photos.


The day starts with catching a northbound transfer run from Tradepoint’s yard to the CSX interchange at Grays Yard a couple of miles away. I thought this would be all I’d get for the day. I’m standing on the shoulder of Finishing Mill Road looking north. Denny’s is just to the right.

I was about to pack it in when I was caught off guard by this southbound SW7 heading towards the Tradepoint yard with a couple of cars.

….zooming in as he gets closer.

High contrast passing shot.

A few minutes after the SW7 passed, a second transfer pulled by an SW1500 followed hot on its heels with a massive cut of cars slotted for spotting at The Home Depot warehouse.

Getting closer…..

There he goes…

That is a LOT of lumber!!

After pulling their cuts into the Tradepoint yard, both units run around their trains and head back to tie up for lunch. Just out of view to my left is a semi-truck embarrassingly “tomahawked” by the crossing gate.

Time for beans. They start early and break for lunch around 11am.

Their work done for the moment, two brothers bathe in the sun.

View of the SW1500 with the signature water tower in the distance complete with the Tradepoint logo.

I thought this was an interesting crossing signal. Behind it are Starbucks and Denny’s, where you can park and grab a bite.

Right beside the engine house is the Atlantic Forest Products warehouse facility. They’re in the process of transferring product to the Quonset hut structure in the distance.

It’s labeled “Bear Creek” on the maps. Personally, I think drainage ditch would be more descriptive but I wasn’t asked. This goes back to the old Bethlehem Steel days. I’m facing west, the main is to my left, Denny’s to my back.

With some good photos in the bag, time to reward myself with coffee and pastries at Pitango Bakery on Baltimore’s waterfront. Such a great city!

If themes like this appeal to you, check out my book 8 Track Plans For Modern Era Switching Layouts. (No Tradepoint plans, but there is one for nearby Canton.